Key Points Of Operation Of Jigger

1. Chemicals: The dye must be mixed in the chemical tank to fully dissolve before it can be put into the cylinder, otherwise the cloth surface may produce color lake stains 

2. Temperature: must be covered with heat preservation operation, in order to keep the same temperature in the cylinder above and below the liquid. 

3. Heating: When steam is added to raise the temperature, the cloth roll shall not be allowed to run, otherwise the temperature difference between the front and rear will cause the color difference. 

4, in winter to prevent roll too cold to make contact with the roll cloth layer is cooling, hot dye can be poured several times roll to increase the temperature.