Brief understanding and guidance on the operation of the beam dyeing machine
Jun 10, 2021
1. Preparation before operation
(1) Check the dye tank or dye vat of the dyeing machine to see if it is clean. If it is not clean, then it should be cleaned.
(2) Check the incoming cloth weight and the planned weight. If the deviation exceeds 10%, the operation cannot be performed.
(3). Prepare the warp beam and inspect it.
(4) Set up the inner baffle and check it to see if it is clean.
2. Operation
(1) Before inserting the cloth, check the inside of the machine to see if it is clean and dirty.
(2) Check the sealing ring to see if it is intact and the sealing performance is good.
(3). First push the cloth car to the front of the warp beam dyeing machine, and then push the warp beam into the machine. During this process, pay attention to the cloth car not hitting the dyeing machine.
(4) When closing the door, be careful not to leave debris in the machine to avoid damage to the machine.
(5) Operate in accordance with the specified requirements, pay attention to some matters, and fill in the production flow sheet.