How to keep high temperature and high pressure overflow dyeing machine in work

1. Use a high-pressure airless sprayer to spray thermal insulation coating on the surface of the high-temperature and high-pressure overflow dyeing machine, and he will make the surface of the high-temperature and high-pressure overflow dyeing machine form a dense thermal insulation coating with a thickness of 1.5~5mm.

2. According to the first heat preservation method, we have the following specific steps:

(1) Remove various oil stains and protective compounds on the surface of the high temperature and high pressure overflow dyeing machine.

(2) Turn on the stirring device at a temperature not lower than 21°C, and stir the heat insulation paint in the paint bucket to a milky consistency.

(3) Use a high-pressure airless sprayer to spray the heat-insulating paint that has been stirred before. To ensure that the thickness of each coating meets the requirements, wait until the previous coating is completely dry before spraying the next coating.

3. For the vertical surface of all the above-mentioned high temperature and high pressure overflow dyeing machines, the thickness of each layer of thermal insulation coating is 0.23-0.25mm.