HT Jigger Dyeing Machine method of avoiding and removing the phenomenon of clogging
Nov 08, 2021
①Strictly follow the operating procedures for dyeing. When the processing type changes, the return valve, nozzle and other equipment should be adjusted in time. After the fabric enters the machine, it must run slowly for 3 to 5 minutes and then close the door for dyeing.
②For some frivolous and high-density fabrics, that is, fabrics that do not sink in the dyeing bath but are easy to float on the liquid surface, work hard to formulate techniques and determine the dyeing prescription to avoid the occurrence of clogging, such as adopting the method of full overflow, or Add deaerators in the dye bath.
③In the dyeing process, pay attention to check whether there is a jam in the machine. Once found, the recoil blocking equipment can be activated to remove the clogged cloth.
④ To avoid the increase of foam in the dyeing bath, consider adding defoamers and selecting soft water in the dyeing bath.