HT Jigger Dyeing Machine's dyeing procedures
Aug 12, 2021
①Strictly follow the operating procedures for dyeing. When the processing type changes, the return valve, nozzle and other equipment should be adjusted in time. After the fabric enters the machine, it must work slowly for 3 to 5 minutes before closing the door for dyeing.
② Regarding some frivolous and high-density fabrics, that is, fabrics that do not sink in the dye bath but are easy to float on the liquid surface, work hard to formulate technology and determine the dyeing prescription to avoid the occurrence of clogging, such as adopting the method of full overflow, or Add degassing agent etc. in the dyeing bath.
③In the dyeing process, pay attention to check whether there is clogging in the machine. Once found, the recoil and blockage removal equipment can be activated to clean the blocked cloth.
④ To avoid the increase of foam in the dye bath, you can add a proper defoamer and choose soft water in the dye bath.