Introduction of different cleaning methods of HT Jigger Dyeing Machine

1. To remove oligomers, often use NaOH or acid sulfite detergent to wash the tank. It can also participate in the carrier to help the dissolution of oligomers, and the high temperature resistant dispersant can inhibit the precipitation of oligomers. Rapid cooling and high temperature drainage can avoid the accumulation and aggregation of oligomers.

2. The removal of alkali scale, calcium salt and fiber debris can be cleaned with hydrochloric acid or sulfuric acid. It has a good effect, but it has a significant impact on stainless steel (corrosion-resistant stainless steel is used throughout the inner wall of the dyeing tank). The gloss of the chrome plating layer disappears completely and is corrosive. Very big. It is recommended to use Transchem's TF-105F cylinder cleaning agent, which does not contain strong acid, is not corrosive to the cylinder body, and has an excellent cleaning effect.

3. To remove the agglomerated dyes, tars, and greases, you can use the traditional vat preservation process to restore and clean with soluene, liquid caustic soda, emulsifiers, etc., when cleaning the dye vat, you must add an appropriate amount of waste cloth in the vat. To ensure that the high-speed water sprayed from the nozzle is washed through the waste cloth to the "dead corner" that is difficult to reach in normal circulation.