Introduction to the main structure of Jigger Dyeing Machine

cloth stick

The central mechanism of the Jigger Dyeing Machine is two rolling rollers that are alternately wound back and forth. The fabric is unwound from one rolling roller and rolled onto the other rolling roller. During the alternate winding process, it continuously passes through the rolling cloth. The dye solution under the stick absorbs the dye solution onto the cloth surface, and absorbs, combines and fixes it during the winding process.
Dye vat:
Also known as the dye tank, it is located under the cloth rolling stick and holds the dye liquid. The flat width of the cloth in the winding passes through the liquid at the bottom of the dye vat.
Gear differential mechanism:
One is to keep the linear speed of the two cloth rolls constant to ensure that the fabric will not be folded and wrinkled due to fast feeding and slow closing when the fabric passes through, and will not cause excessive tension, elongation or even A mechanical device that breaks fabric.
Cylinder head:
The cylinder head of the normal temperature Jigger Dyeing Machine plays the role of keeping the top, bottom, left and right temperature inside the machine cylinder, preventing the fabric above the liquid from being blown by the wind and causing energy loss due to heat dissipation, and also preventing the upper temperature from being too low to affect the penetration and fixation of the dye. The cylinder head of the high-temperature and high-pressure Jigger Dyeing Machine acts as a pressure cooker cover. The internal temperature of the machine cylinder exceeds 100°C, which is suitable for dyeing polyester fabrics with disperse dyes.