Introduction to the operating procedures and maintenance of the overflow dyeing machine

Overflow dyeing machine is to be stopped for a comprehensive inspection every six months in order to discover problems in time. To solve the problem, I have introduced three aspects of knowledge about the application, type, and precautions for use, about the product of the dyeing machine. Let me know and understand it, at least know what it is and what it can be used for. But just knowing these is not enough because there are many more that have not been introduced yet, and I need to explore, solve and learn, so I will continue to introduce the relevant knowledge of the dyeing machine below.

Overflow dyeing machine and whether the fasteners are loose or not, the parts of each part of the machine. If there is any abnormality, it should be dealt with in time. Then place them evenly in the drum to sort the fabrics. Then close the inner and outer doors, add detergent, and open the drain valve. Add water within the specified range. Put in steam while the dyeing machine is working. The water temperature is maintained at about 70°C. After reaching the specified requirements, close the steam valve. Then cut off the power. Turn off the power switch. Regular lubrication is required. Dyeing machine, machine running part, friction part and bearing, etc. A kind of bleaching and dyeing equipment, mainly used for dyeing, bleaching, scouring and washing of woolen sweaters, acrylic and cotton sweaters, etc. It can also be used for bleaching and dyeing of waste products, so this kind of mechanical equipment is suitable The range is very wide and its main features are stable and reliable operation, no noise, and convenient speed adjustment.

Not too much or too little, the amount of fabric should be moderate. Too much will easily cause the machine to overload and damage the machine. The overflow dyeing machine should be placed evenly when the fabric is placed in the drum. In order to avoid the phenomenon of excessive vibration due to uneven force, which affects work efficiency. To lock the cylinder door, after the fabric is placed. To prevent the fabric from being thrown out of the tube. When the drain valve is opened, pay attention to that the water level cannot exceed the specified range. So as not to affect the use effect. The roller should be cleaned before use. If there is any problem, it should be adjusted in time. The tightness of the triangle tape should be appropriate. The sealing cover cannot be opened. If there is any abnormality, stop for maintenance immediately. When the machine is working.