Jigger Dyeing Machine should match the amount of fabrics in the cylinder appropriately

For example, Jigger Dyeing Machine M2125 dyes light and thin fabrics at normal temperature and pressure, generally between 1300 and 1500 m/spool. If you dye light-colored fabrics, it should be less to prevent the color difference between the head and the tail. For example, the Jigger Dyeing Machine with high temperature and high pressure horizontal door opening, generally speaking, the number of cylinders per shaft is also within this range. Operators need to pay attention to adjusting the mechanical tension, because polyester and nylon are thermoplastic fibers. If the tension is too high above 100°C, the elongation of the fabric will be large, and the fabric will become thin and feel tight. Therefore, when dyeing chemical fiber fabrics on the Jigger Dyeing Machine, the tension should be tight at the beginning and looser above 100°C. Don't stay the same. In addition, dyeing thick fabrics on the Jigger Dyeing Machine, such as corduroy, canvas, etc., has relatively less color difference between the head and tail and the left, center, and right, but it still cannot be ignored. In short, the author believes that to reduce or improve the color difference between the head and tail and the left, middle and right of the dyed fabric on the Jigger Dyeing Machine, the key is that the operator must be proficient in the performance of the equipment; the operator must be responsible and pay more attention to the operation of the equipment. The temperature and pressure gauge are normal. Whether or not, the cleanliness of the inside and outside of the cylinder. The equipment department must maintain and maintain frequently, and don't let it go. If the sealing ring on the high temperature and high pressure Jigger Dyeing Machine leaks, it must be replaced in time. Don't ignore the operator's reaction, otherwise the consequences will be disastrous.