Points to note in the dyeing process of HT Jigger Dyeing Machine

①Strictly perform dyeing in accordance with operating procedures. When there is a change in the processing variety, the return valve, nozzle and other equipment must be adjusted in time. After the fabric enters the machine, it must run slowly for 3 to 5 minutes before closing the door and adding materials for dyeing.

②For some frivolous and high-density fabrics, that is, fabrics that do not sink in the dyeing bath but are easy to float on the liquid surface, work hard to formulate the technology and determine the dyeing prescription to prevent the occurrence of clogging, such as adopting the overflow and full overflow method, or Add degassing agent etc. in the dyeing bath.

③In the dyeing process, pay attention to check whether there is clogging in the machine. Once found, the recoil and blockage removal equipment can be activated to clean the blockage.

④ To prevent the increase of foam in the dye bath, you can add a proper defoamer and choose soft water in the dye bath.