Structural composition and types of HT Jigger Dyeing Machine

Rolling stick:

The management center of Jigger Dyeing Machine is organized by 2 reeling rollers that replace the rewinding machine. The fabric is unwound from one reeling roller and rolled to the other reeling roller. During the whole process of replacing the rewinding machine, continuous It crosses the dyeing liquid under the cloth roll, digests and absorbs the dyeing liquid onto the nylon fabric, and absorbs, fuses, and inhibits contact during the whole process of the rewinding machine.

Dyeing machine:

Also called the dyeing tank, it is located just below the cloth roll and holds the dyeing liquid.

Transmission gear differential protection organization:

A method that stabilizes the angular speed of the two cloth rolls to ensure that the fabric is not easily stretched and wrinkled due to fast supply and slow retraction, and will not cause excessive support, lengthening or even due to slow supply and fast retraction. Mechanical equipment for tearing fabrics.

Cylinder head:

Under normal temperature, the cylinder head of Jigger Dyeing Machine has the effect of stabilizing the left and right and up and down temperatures inside the cylinder, avoiding the damage to the power and energy caused by the heat exhaust of the fabric on the liquid surface, and also avoiding the infiltration and contact of dyes due to the low temperature of the upper end. inhibition. The cylinder head of the HTHP Jigger Dyeing Machine has the function of a working pressure cover. The temperature inside the cylinder exceeds 100°C, and it is suitable for disperse dyes to dye polyester fabrics.