What are the performance of Jigger Dyeing Machine equipment

Practical activities feel that the left, center, and right color cast of the fabric is at a certain level due to the physical properties, especially the scaffold in the tank, which must be adjusted immediately according to the thickness of the fabric. Lightweight fabrics such as dyed nylon yarn, polyester cloth pongee, and polyester taffeta are particularly sensitive to the regulations of scaffolding. I once saw in a factory that the balance between the two sides and the middle of the scaffold on the Jigger Dyeing Machine is very different. The more protruding one in the middle is 125px away from the two sides, and the flat part is only 25px away. Due to the protruding scaffolding of the former, the fabric is scraped more seriously during the whole process of coloring, and the composition of the dyeing liquid is too small, resulting in light color; while the latter is easy to cause wrinkles. After adjusting, adjust the middle protrusion of the scaffold to a distance of 2～75px from the two sides. Practical experience has proved that the color of the fabric is well-proportioned and there is no wrinkle. In addition, the bottom of the Jigger Dyeing Machine should be equipped with two heating devices, immediate and indirect. For example, you can use immediate heating when raising the temperature and feeding. After the feeding is completed and the liquor ratio is adjusted, you can use an indirect heating device. Nowadays, most machines and equipment are equipped with computers. The editor feels that it is not suitable to use a computer for one-tank profiling until the profiling is successful. Basically, when the specific record is done, the computer should be used in mass production to ensure that the main parameters of the processing technology are appropriate.