How to keep warm in normal temperature and normal pressure dyeing machine at work

1. Use a high-pressure airless sprayer to spray the thermal insulation coating on the surface of the normal temperature and normal pressure dyeing machine, which will form a dense thermal insulation coating with a thickness of 1.5~5mm on the surface of the normal temperature and normal pressure dyeing machine.

2. According to a heat preservation method, we have the following specific steps:

(1) Remove various oil stains and protective compounds on the surface of the normal temperature and normal pressure dyeing machine.

(2) Turn on the stirring device at a temperature not lower than 21 °C, and stir the thermal insulation paint in the paint bucket to a milk-like consistency.

(3) Use a high-pressure airless sprayer to spray the previously stirred thermal insulation coating in layers. To ensure that the thickness of each coat meets the requirements, wait until the previous coat is completely dry before spraying the next coat.