How to maintain GTM Jig Dyeing Machine to extend its service life

1. Daily cleaning
After each use, clean the machine in time. Rinse the dye vat and cloth guide rollers and other parts with clean water to remove residual dye. Because the dye will chemically change and corrode the machine parts if it remains for a long time. For the surface of the machine, wipe it with a soft damp cloth to prevent dust and dye stains from accumulating and entering the machine to affect the operation of the machine.
2. Maintenance of mechanical parts
Regularly check the transmission parts such as motors, belts and gears. Make sure the belt tension is moderate. Too tight will easily cause belt wear, and too loose will reduce the transmission efficiency. Add an appropriate amount of lubricant to the gears to reduce friction loss.
Check the operation of the cloth winding device. Make sure that the reel can rotate smoothly without jamming. Replace worn bearings in time to avoid damage to the entire device due to excessive local force.
Check the sealing of the dye vat. Good sealing can prevent dye leakage and prevent foreign impurities from entering the dye vat. If the gasket is found to be aging or damaged, it should be replaced in time.
3. Control system maintenance
The electrical control system needs to be checked regularly to prevent line aging and short circuit. Keep the control box clean and dry to prevent moisture and dust from affecting the performance of electronic components. At the same time, the control program and parameters should be backed up to prevent the system from failing and being restored in time.
4. Compliance with operating specifications
The operator should use the machine strictly in accordance with the operating procedures. Avoid running the machine under full load or overload to prevent key components such as the motor from being damaged due to overload. And when starting and stopping the machine, follow the correct steps to reduce the impact of the machine. Through these comprehensive maintenance measures, the service life of the GTM Jig Dyeing Machine can be effectively extended.
If you are interested in the maintenance of the GTM Jig Dyeing Machine, please contact Bosen industrial group. Our professional team will provide you with tailor-made solutions and comprehensive technical support.