Installation of Dyeing Machine and Analysis of Influencing Factors of Airflow Dyeing Machine

1. Installation of the dyeing machine

1. The installation position of the machine should be determined, but before installation, the machine operation and maintenance space should be reserved in advance to facilitate the operation.

2. The machine should be installed on a flat and firm foundation and fixed on the foundation with anchor screws.

3. When installing the dyeing machine, use the instrument to check the levelness of the machine. If it is not level, it must be straightened.

4. The three-phase four-wire power supply of the machine should be placed in the machine wire box.

5. During the installation process, the machine should be grounded to ensure safety.

2. Influencing factors of airflow dyeing machine

The influencing factors of airflow dyeing machine are:

1. During dyeing, if the dyeing and color fixing are not synchronized, it will cause secondary dyeing, which will destroy the uniformity of dyeing and easily cause step difference. Therefore, it is necessary to choose dyes with good compatibility for dyeing to avoid these problems.

2. The temperature of the dye bath should be appropriate, too high or too low is not good. Moreover, the heating rate should not be too fast, so as to avoid the phenomenon of color flowers.

3. The dissolving of the dye should be sufficient, and manual stirring can be carried out if necessary to prevent the phenomenon of discoloration.

4. To prevent friction during the dyeing process, you can use some suitable lubricants, or reduce the running speed of the fabric to avoid scratches on the fabric.