Knowledge

Tips on jigger dyeing machine: operating precautions for high-temperature dye...

1. Mix the dye solution. According to printing and dyeing equipment manufacturers, when mixing dye solutions, the dye should be mixed with a small amount of cold water to form a slurry, and then dilut

The development of jigger dyeing machine and key points of operation

The early jigger dyeing machines were made of wood and iron. In the mid-to-late 1970s, they gradually began to be made of stainless steel. Depending on the type of fabrics produced and processed, ther

Maintenance of jigger dyeing machine and color difference treatment methods

1. Maintenance and repair of jigger dyeing machine. Wuxi Jinrunda, a professional manufacturer of jigger dyeing machines, reported on December 31, 2022 1. The strong glue blocks in the mechanical equi

How to clean jigger dyeing machine

Long-term use of high-temperature and high-pressure jigger dyeing machines will deposit waste on the inner wall of the cylinder body. Especially in the printing and dyeing factory field, great emphasi

The structural composition and types of high temperature and high pressure ji...

Cloth rolling stick: The jigger has two rolling rollers that alternate between the yarn rewinding machines. The fabric is unwound from one rolling roll and rolled onto the other. During the whole proc

Some knowledge about modified fiber of jigger dyeing machine

Common fiber modification methods 1. Physics Physical modification usually uses various physical methods and means to improve fiber properties by changing the aggregation structure, morphological stru

Four common defects in nylon and nylon dyeing on jigger dyeing machines and t...

1. Horizontal rails horizontal bars Cause Analysis Polyamide fibers on fabrics differ in their chemical or physical characteristics: (1) Physical differences in yarns, including differences in yarn co

Preparation method of liquid disperse dye for jigger dyeing machine

Wetting of disperse dyes When the disperse dye solid particles come into contact with the dispersion medium water, the original solid-gas interface on the surface of the dye particles is replaced by a

What to do if white spots appear during dyeing

1. Good quality and bad treatment of fabrics In production, if the quality of the gray fabric is good, the dyeing rate will be high, the dyeing depth will be good, and the cloth surface will be smooth

Causes and prevention methods of common problems in jet overflow dyeing

1. Key points of operation 1.1 Preparation before the gray cloth enters the machine Check whether the machine is clean, whether the tools are fully prepared, whether all instruments, electrical applia

Common quality problems in package dyeing—color difference between inside and...

1. Insufficient flow of main pump The essence of the color difference between the inner, middle and outer layers of the package is that the amount of dye dyed on the inner, middle and outer yarns is d

Is it easy to use the high temperature and high pressure dyeing machine?

1. Preparation work 1. Cleaning equipment: The high-temperature and high-pressure dyeing machine needs to be cleaned before use, and ensure that there is no debris inside the machine to avoid affectin