The structural composition and types of high temperature and high pressure jigger dyeing machines

Cloth rolling stick:

The jigger has two rolling rollers that alternate between the yarn rewinding machines. The fabric is unwound from one rolling roll and rolled onto the other. During the whole process of replacing the yarn rewinding machine, it continues to pass through the rolling rolls. The dyeing liquid under the nylon fabric is absorbed into the nylon fabric, and is absorbed, fused, and contacted during the entire process of the yarn rewinding machine.

Dyeing machine:

Also called the dyeing trough, it is located directly below the cloth rolling roller and contains the dyeing liquid. The fabric in the rewinding machine passes under the liquid at the bottom of the dyeing machine.

Transmission gear differential protection organization:

One is to stabilize the angular speed of the two rolling rollers to ensure that the fabric will not stretch and wrinkle due to fast supply and slow down when the fabric is passed, nor will the support force be too large, elongated or even caused by slow supply and fast closing. Mechanical equipment for tearing fabrics.

Cylinder head:

The cylinder head of the jigger dyeing machine at room temperature has the function of stabilizing the left and right, upper and lower temperatures inside the cylinder, preventing the fabric on the liquid from being blown gently by the wind and dissipating heat, causing energy damage. At the same time, it also prevents the upper end temperature from being too low, which may harm the penetration and contact of the dye. inhibition. The cylinder cover of the high-temperature high-pressure jig dyeing machine functions as a pressure cover. The internal temperature of the cylinder exceeds 100°C and is suitable for dyeing polyester fabrics with disperse dyes.