Knowledge

HT Jigger Dyeing Machine's fabric with liquid volume problem

The size of the cloth roll tension and the speed of the line speed are also important factors that affect the amount of liquid in the fabric. This is because there is a drainage problem in the fabric

Introduction of HT Jigger Dyeing Machine's sediment cleaning

Long-term use of high-temperature and high-pressure dyeing machines will deposit dirt on the inner wall of the tank. Especially in the setting where the printing and dyeing industry pays attention to

Improvement of processing technology of HT Jigger Dyeing Machine

With the continuous deepening and strengthening of environmental protection policies, traditional printing and dyeing processes and equipment are in urgent need of further development. The traditional

Precautions after anodizing of HT Jigger Dyeing Machine

1. After anodizing, it can only be washed with cold water, not hot water, or touch with hands to prevent the dyeing of the film from being affected. In addition, in order to prevent residual acid from

Introduction to the cleaning of pollutants generated by the use of HT Jigger ...

Long-term use of high-temperature and high-pressure dyeing machines will accumulate dirt on the inner wall of the tank, especially in the context of the printing and dyeing industry focusing on the co

The working principle of HT Jigger Dyeing Machine steam pipe

Direct (porous) steam pipes and direct (closed) steam pipes are laid at the bottom of the dyeing tank of the jigsaw dyeing machine. The direct steam pipe is used to spray steam to heat the dye solutio

Structure characteristics of HT Jigger Dyeing Machine

• Adopt foreign excellent technology AC variable frequency drive, PLC control and data communication technology. •Real direct detection of cloth surface tension and line speed, closed loop control. •U

HT Jigger Dyeing Machine's dyeing procedures

①Strictly follow the operating procedures for dyeing. When the processing type changes, the return valve, nozzle and other equipment should be adjusted in time. After the fabric enters the machine, it

Introduction of three cleaning methods of HT Jigger Dyeing Machine

1. For the removal of oligomers, NaOH or acidic sulfite detergent is often used to wash the tank. It can also participate in the carrier to help dissolve the oligomers, and the high temperature resist

Analysis of Common Defects of Normal Temperature Jigger Dyeing Machine

Normal Temperature Jigger Dyeing Machine is equipped with an arc-shaped tension frame (commonly known as a stretcher) in order to prevent the fabric from wrinkling during operation. The size of the te

The motor working process of HT Jigger Dyeing Machine

The motor of the HT Jigger Dyeing Machine has always been in the form of power generation. The general approach is to use a braking unit and a braking resistor to consume the energy generated by the d

Applicability of Jigger Dyeing Machine

The high temperature and high pressure automatic jig dyeing machine is suitable for the high temperature and high pressure dyeing of various thick and thin chemical fiber fabrics, as well as the dyein