Knowledge

Working principle of Electric Control Valve

Working Power Supply: DC24V, AC220V, AC380V and other voltage levels. Input Control Signal: DC4-20MA or DC1-5V.

Overview of Electric Control Valve

Electric Control Valve is an important instrument in the process control of industrial automation. With the higher degree of automation in the industrial field, it is being applied in various industri

Function of Butterfly Valve

Butterfly Valve is usually less than 90 full-close, Butterfly Valve and butterfly Rod itself has no self-locking ability

Advantages of butterfly valve

Simple structure, small size, short length, small volume, light weight, suitable for large diameter valves.

Characteristics of Butterfly Valve

The Butterfly Valve has the characteristics of simple structure, small volume, light weight, low material consumption, small installation size, quick switch, 90 reciprocating rotation, small driving T

Working Principle of butterfly valve

Butterfly Valve is to open, close or adjust the media flow of a valve with disc-type opening and closing pieces to rotate back and forth about 90.

Brief introduction of Butterfly Valve

Butterfly Valve is also called Flap Valve, is a simple structure of the valve, can be used for low-pressure pipeline medium switch control of the butterfly valve is closed (disc or disc) for the disk,

Principle of singeing machine

SINGEING is the process that makes the fabric pass through the flame of singeing machine or brush against the red-hot metal surface to remove the fluff on the fabric surface and obtain a smooth surfac

Purpose of singeing machine

​When fibers are rubbed in the spinning and weaving process, many short, loose fibers are exposed to the surface of the yarn, and a layer of short fibers stands on the surface of the fabric.

Overview of singeing machine

This sub-gas and contact hot plate two, hot plate singeing machine is divided into copper plate singeing machine, alloy cylinder singeing machine and electric heating metal plate singeing machine seve

Construction principle of dehydrator

​The main body of the dehydrator is composed of a fixed ring and a moving ring. The front part is concentrated part and the back part is dehydrated part.

Main technical characteristics of industrial dehydrator

The utility model is provided with a starting wheel structure under the shaft, so that the inner liner can be accelerated gradually when starting and the motor can not be overloaded.