The motor working process of HT Jigger Dyeing Machine

The motor bai of the HT Jigger Dyeing Machine has always been in the form of power generation. The general approach is that du uses a braking unit and a braking resistor to consume the energy generated by the dao axial flow braking in the form of heat. For equipment such as jiggers that operate for a long time in the form of power generation, the waste of electric energy in this method is a lot. Kechuang Liyuan inverters can easily support the public DC bus. In practice, we directly connect the PN buses of the two inverters in parallel, so that the energy generated by normal operation braking will pass through the parallel bus and return to the driven motor. In order to consider that during the rapid deceleration time, it is possible that both motors are in a power generation condition, and a braking resistor is still connected in parallel to one of the inverters. The operation of this resistor is short-term and the energy consumption is small. A large resistance box under the control cabinet of the jigger dyeing machine can now be completely eliminated, which not only saves energy, but also avoids a large heat source, thereby improving the reliability of the system.