What issues should be paid attention to in the daily maintenance of Jigger Dyeing Machine?

1. Regular cleaning: including removing dust, dirt and dye residue on the surface of the machine, especially in the dye tank, cloth guide roller and other parts, to prevent impurities from accumulating and affecting the dyeing effect and equipment operation.
2. Check the transmission parts: such as belts, chains, gears, etc., to ensure their normal operation, without looseness, wear or damage, and add or replace lubricating oil in time.
3. Maintain the electrical system: regularly check electrical components such as wires, plugs, controllers, etc. to ensure good connection, no short circuit, open circuit and other faults, to ensure electrical safety.
4. Check the dye circulation system: including pumps, pipes, valves, etc., to ensure that the dye circulation is smooth and there is no leakage.
5. Calibrate instruments: such as thermometers, pressure gauges, etc., to ensure that they are accurately displayed so as to accurately control process parameters.
6. Check the sealing parts: prevent dye leakage, if there is wear or aging, it should be replaced in time.
7. Tighten the connectors: regularly check the connecting screws, nuts, etc. of each part of the machine to ensure that they are tightened to prevent looseness and cause faults.
8. Carry out rust prevention: Regularly carry out rust prevention on parts prone to rust to extend the service life of the equipment.
9. Train operators: Ensure that operators are familiar with the operating procedures and maintenance requirements of the equipment to avoid equipment damage due to improper operation.
10. Establish maintenance files: Record the content, time and problems found in each maintenance for subsequent review and analysis.