Knowledge

The structure of the winding control system of the dye jigger

The winding control system of the dye jigger usually consists of the following main parts: Sensor: Including tension sensor, speed sensor and position sensor. The tension sensor is used to detect the

How is the winding speed of the dye jigger controlled?

The winding speed of the dye jigger is usually controlled by a frequency converter. The use of variable frequency speed regulation in the control of the dye jigger has the characteristics of simple co

Precautions for operation of dyeing machine

1. The machine must be stopped when the cloth rolls onto the roller. First, wet the cloth tip with water and stick it evenly on the roller. The machine can be started only after it is properly stuck.

Several key points of dyeing on a jigger

(1) The edges of the fabric entering the drum should be neat. No matter what kind of jigger is used for dyeing, first, push a car (roll) of fabric with the ends sewn in advance to the front of the dru

Working process of dye jigger

The motor of dye jigger is always in power generation mode. The usual practice is to use brake unit and brake resistor to consume the energy generated by axial flow braking in the form of heat. For eq

Key points for the operation of the dyeing machine

1. Chemical material: The dye must be fully stirred and dissolved in the chemical material barrel before it can be injected into the machine cylinder, otherwise the cloth surface may produce color lak

What are the characteristics of high pressure and high temperature dyeing mac...

1. Because it is equipped with a cloth lifting motor and variable frequency speed regulation, the cloth speed can reach up to 600m/min; 2. It adopts a new structural design, the grey cloth can run at

What problems may be encountered when the dyeing machine is in production?

When cotton fabrics are produced by dyeing and finishing machinery, there are actually many factors affecting the printing and dyeing results because there are many stages before and after. When dyein

How to improve the dyeing quality of overflow dyeing machine?

1. The influence of the capacity of overflow dyeing machine Overflow dyeing machine has a very large nominal capacity, but this nominal capacity is not suitable for any fabric. Therefore, in productio

What should be paid attention to when using a high-temperature dyeing machine?

1. Preparation of dye liquor When preparing the dye liquor, you should first use a small amount of cold water to make the dye into a slurry, and then dilute it with room temperature water. Note that t

What are the application scope and types of dyeing machines?

The dyeing machine is made of all stainless steel materials. The mechanical equipment has the advantages of no noise and convenient speed regulation. It is suitable for seamless underwear, flesh-color

What are the insulation methods for the package dyeing machine?

1. Remove all kinds of oil stains and protective compounds on the surface of the package dyeing machine. 2. Turn on the stirring device at a temperature not lower than 21°C and stir the heat-insul