Correct use and maintenance of dyeing machines

1. Use the dyeing machine correctly:
1. The dyeing machine should be inspected before use to ensure that the power wiring is stable, the instruments are sensitive and accurate, and all parts operate freely.
2. Select and adjust appropriate dye, temperature, pressure and other parameters as needed, and do not change them at will.
3. Operators should pay attention to avoid dye splashing and machine failure. When operating the dyeing machine, you should stay focused and pay attention to prevent dangers, such as paying attention to your hands and not touching the moving parts of the machine.
4. During the dyeing process, attention should be paid to controlling the temperature and air pressure to prevent overheating or excessive air pressure from causing dye splashing or machine damage.
5. After dyeing is completed, the dye and waste gas should be discharged in time, the inside of the dyeing machine and the work surface should be cleaned, and the equipment should be regularly maintained and maintained to ensure normal operation.
2. Protect and maintain the dyeing machine:
1. The dyeing machine must be placed in a clean, ventilated and dry room to prevent moisture, ultraviolet radiation and pollution.
2. Operators should clean and disinfect the dyeing machine regularly to prevent bacterial growth.
3. Lubricate and maintain the dyeing machine regularly to ensure the normal operation and durability of the parts. The specified amount of lubricating oil should be used, not too much or too little.
4. The power supply should be cut off when not in use to avoid the risk of leakage and short circuit.
5. For dyeing machines that have not been used for a long time, appropriate protection and anti-corrosion treatment should be carried out to avoid equipment aging and rust. The maintenance and upkeep of dyeing machines can not only extend the service life of the equipment, but also avoid production losses caused by equipment damage.