How to maintain SMD Normal Temperature Jigger Dyeing Machines

1. Daily cleaning
After each use, the dyeing tank should be cleaned in time. Because during the dyeing process, impurities such as dye residue and fiber scraps will remain in the dyeing tank. You can use a special detergent and a soft brush to carefully clean the inner wall and bottom of the dyeing tank to avoid the accumulation of impurities affecting the quality of subsequent dyeing. At the same time, the cloth roller should also be cleaned to prevent the fluff, dust, etc. on the fabric from adhering to the roller, causing defects in the fabric during the jig dyeing process.
2. Regularly check the mechanical parts of the machine
Focus on the cloth rolling system and check whether the bearings of the cloth rolling roller are flexible. If the bearings are worn, it may cause uneven cloth rolling or abnormal noise. Regularly add or replace lubricating grease to ensure that the bearings are in good working condition. In addition, check the air pressure system of the lifting cylinder and pneumatic opening and closing device. Make sure that there is no leakage in the air pipe, the pressure gauge shows normal, and it is adjusted according to the specified air pressure range.
3. Maintain the heating system
For direct steam heating, check whether the steam pipe is leaking. You can find the leak point by observing whether there is steam coming out around the pipe or using professional detection tools. For heat exchangers heated by indirect steam, the internal scale should be cleaned regularly. Scale will reduce the efficiency of heat exchange and affect the heating speed and temperature control. Acidic detergent can be used for cleaning, but be careful to follow the correct operating procedures to avoid damaging the heat exchanger.
4. Maintenance of electrical system
Regularly check whether the wires are damaged or aged, and ensure that the electrical connections are firm. Calibrate electrical components such as temperature sensors and controllers to ensure their accuracy. If the temperature sensor deviates, it will lead to inaccurate dyeing temperature control and affect the dyeing effect. At the same time, keep the electrical control cabinet clean to prevent dust from entering and causing short circuits and other faults.
If you are interested in learning more about the maintenance methods of SMD Normal Temperature Jigger Dyeing Machines, please pay attention to www.chinadyeingmachines.com and start an efficient journey. We look forward to working with you to provide tailored product solutions for your company.