Knowledge

Maintenance of jigger and how to solve the problem of color difference

Content 1: Maintenance and maintenance of dyeing jigger 1. The superglue in the equipment should be inspected and maintained every week, and the chain should also be cleaned. 2. The inside of the tran

Precautions for operation of dyeing machine

1. The machine must stop when the cloth is rolled onto the roller. Wet the tip of the cloth with water first, and paste it on the roller evenly, and then drive it. It is strictly forbidden to pull the

Some Key Points of Dyeing on Jiggers

(1) The edges of the cylinder inlet and row should be neat. No matter what kind of fabric is to be dyed on the jigger, first of all, a cart (roll) of fabric that has been sewn in advance should be pus

The working process of the dyeing machine

The motor of the jigger is always in the power generation mode. The usual practice is to use a braking unit and a braking resistor to consume the energy generated by axial flow braking in the form of

Operation points of dyeing jigger

1. Chemicals: The dye must be fully stirred and dissolved in the chemical tank before it can be injected into the machine tank, otherwise the cloth surface may have color lake stains 2. Temperature: I

What are the characteristics of high-pressure and high-temperature dyeing mac...

1. Because it is equipped with a cloth lifting motor and frequency conversion speed regulation, the cloth speed can reach 600m/min; 2. The design method of new structure is adopted, the gray cloth can

What problems may be encountered when the dyeing machine is in production?

When cotton fabrics are produced by dyeing and finishing machines, there are actually more front and rear stages, and there are actually more factors that affect the printing and dyeing results. When

How to improve the dyeing quality of overflow dyeing machine?

1. Influence of cloth capacity of overflow dyeing machine Overflow dyeing machines have an extra large nominal capacity which is not suitable for any fabric. Therefore, in production, it is necessary

What should be paid attention to when using high temperature dyeing machine?

1. Preparation of dyeing liquid When preparing the dyeing liquid, first use a small amount of cold water to make the dye into a paste, and then dilute it with room temperature water. Note that the tem

How the High Temperature Jigger Dyeing Machine is Cleaned

The long-term use of high-temperature Jigger Dyeing Machine will deposit waste in the inner cavity of the cylinder body, especially in the situation that the paper mill industry generally attaches gre

How High Temperature Jigger Dyeing Machine Works

The motor of the Jigger Dyeing Machine is always in the power generation mode. The general method is to use a braking module and a braking resistor to dissipate the kinetic energy caused by axial flow

What are the influencing factors of the dyeing machine

1. When dyeing, if the dyeing and color retention are not synchronized, it will cause secondary dyeing, which will damage the uniformity of dyeing and easily cause step difference. Therefore, it is ne