Knowledge

Five principles for the installation of overflow dyeing machine

1. The installation location of the overflow dyeing machine should be confirmed first, but before the installation, space for the repair and operation of the dyeing machine should be reserved to facil

How to keep high temperature and high pressure overflow dyeing machine in work

1. Use a high-pressure airless sprayer to spray thermal insulation coating on the surface of the high-temperature and high-pressure overflow dyeing machine, and he will make the surface of the high-te

Main technology of high temperature and high pressure overflow dyeing machine

1. Equipped with cloth lifting motor, frequency conversion speed regulation, cloth speed up to 600m/min; 2. The new structure design enables the fabric to run at high speed under low tension, and is e

How to avoid some common problems of HT Jigger Dyeing Machine

1. When dyeing, if the dyeing and fixing are not synchronized, it will cause secondary dyeing, which will destroy the uniformity of dyeing, and simply cause segmentation. Therefore, it is necessary to

Introduction to the fuzzing or pilling phenomenon of HT Jigger Dyeing Machine...

In the process of airflow dyeing, the fabric runs relatively fast. When it enters the nozzle and the cloth pipe, although it comes into contact with the dye solution, it is not completely surrounded b

Main factors affecting the dyeing quality of HT Jigger Dyeing Machine

(1) The main factors that affect the quality of dyeing with overflow dyes include dye use and method of participation, dyeing temperature, variety, dosage and method of participation of salt and alkal

Precautions for HT Jigger Dyeing Machine anodization

1. After anodizing, it can only be washed with cold water, not hot water, or touch with hands to prevent the dyeing of the film from being affected. In addition, in order to prevent residual acid from

Installation steps and precautions of HT Jigger Dyeing Machine

1. The installation position of the machine should be determined, but before installation, space for machine work and maintenance should be reserved in advance to facilitate operation. 2. The machine

The environmental impact of the operation of HT Jigger Dyeing Machine

With the continuous deepening and strengthening of the environmental protection policy, the traditional printing and dyeing process and equipment urgently need to be further developed. The traditional

Precautions for dyeing with HT Jigger Dyeing Machine

① Strictly follow the operating procedures for dyeing. When the processing type changes, the return valve, nozzle and other equipment should be adjusted in time. After the fabric enters the machine, i

Causes of unevenness of HT Jigger Dyeing Machine

Direct (porous) steam pipes and direct (closed) steam pipes are laid at the bottom of the dye tank of the jigsaw dyeing machine. The direct steam pipe is used to spray steam to heat the dye solution,

Points to note in the dyeing process of HT Jigger Dyeing Machine

①Strictly perform dyeing in accordance with operating procedures. When there is a change in the processing variety, the return valve, nozzle and other equipment must be adjusted in time. After the fab