Knowledge

How to Quickly Solve the Frequency Converter Interference Problem on the Dyei...

1. Keep the frequency converter away from related working equipment: The inverter should choose an independent power supply, and the voltage of the power supply should be stable to avoid sudden change

How should the normal temperature and pressure dyeing machine be kept warm du...

1. Use a high-pressure airless sprayer to spray heat-insulating coating on the surface of the normal temperature and pressure dyeing machine, which will form a dense thermal insulation coating with a

Dyeing process of high temperature and high pressure dyeing machine

(1) Adsorption When the fiber is put into the dye solution, the dye in the dye solution will gradually diffuse and transfer to the surface of the fiber, this process is called adsorption. Adsorption i

The working principle of liquid flow dyeing machine

The liquid flow dyeing machine is a kind of equipment commonly used in textile dyeing. It penetrates the dye into the textile evenly through the liquid flow to achieve the dyeing effect. The working p

Dyeing principle and characteristics of jigger

1.1 Dyeing principle of jigger The dyeing jigger is an intermittent dyeing machine, the dyeing tank is made of stainless steel, and a pair of cloth winding shafts are installed on the tank. Through th

What are the characteristics of high-pressure and high-temperature dyeing mac...

1. Because it is equipped with a cloth lifting motor and frequency conversion speed regulation, the cloth speed can reach 600m/min; 2. The design method of new structure is adopted, the gray cloth can

What problems may be encountered when the dyeing machine is in production?

When cotton fabrics are produced by dyeing and finishing machines, there are actually more front and rear stages, and there are actually more factors that affect the printing and dyeing results. When

How to improve the dyeing quality of overflow dyeing machine?

1. Influence of cloth capacity of overflow dyeing machine Overflow dyeing machines have an extra large nominal capacity which is not suitable for any fabric. Therefore, in production, it is necessary

What should be paid attention to when using high temperature dyeing machine?

1. Preparation of dyeing liquid When preparing the dyeing liquid, first use a small amount of cold water to make the dye into a slurry, and then dilute it with room temperature water. Note that the te

Introduction to the structure and operation points of the high temperature dy...

The main structure: Rolling stick: The central arrangement of the dyeing jigger is two replacement rolls of the reciprocating rewinding machine. The fabric is unwound from one roll and rolled onto the

Key points and precautions for dyeing jigger operation

The high-pressure automatic jigger can be used for high-pressure dyeing of various thick and thin synthetic fiber cotton fabrics, and can also dye various natural and mixed knitted fabrics under norma

The working process of the dyeing machine

The motor of the jigger has always been in the form of power generation. The usual practice is to use a braking unit and a braking resistor to consume the energy generated by axial flow braking in the